RacersGuide.com
"If you need something for your stock car, you'll find it here!"

Chassis Set-up 
Procedure

2. Set the tire pressures.

3. Check tire stagger.

4. Check fluid levels (Some people like to scale with a full fuel cell, others with it half full, just be consistent).

5. Unbolt shocks and take preload out of 5th spring if a torque arm car.

6. Set the ride height at each corner.

7. Set camber.

8. Set caster.

9. Set the toe-out.

10. Set pinion angle.

11. Add weight if needed.

12. Reset the ride height at each corner.

13. Reset front end alignment.

14. Set preload on 5th coil spring if torque arm car.

15. Install shocks.

16. Log all of your numbers on the Set-up Sheets.

Set-up Sheet by RacersGuide.com
"If you need something for your stockcar, you'll find it here!"
Design by TSInternet.com